Friends links
|
|
Show all Our company has following products, please see:
Picture |
Heading |
Updated |
|
Diffusion Alloy Powder
LAP100.29D1 Add Ni(1.70-2.10%)and Cu(1.60-1.90%)in to the base powder(LAP100.29Mo1)mix uniformly. It enables the powder has high compressibility, stable dimensional change rate and good sintering performance. It is suitable for production of high strength |
2019-11-25 |
|
High Compressibility Iron Powder
LAP100.29H is a type of ultra-pure water atomised iron powder, with AD 2.95-3.10g/cm3, with good compression performance, and is widely used in high strength, high density sintered structural PM parts. |
2019-10-29 |
|
Ni-Mo Alloy Powder
LAP100.29A1: Add Ni(1.70-2.00%)and Mo(0.40-0.60%)into the molten steel,which enables all alloy elements fully integrated into the molten steel The powder has high strength and good heat treatment performance This type of power is mainly used for productio |
2019-10-02 |
|
Atomized Pure Iron Powder
LAP100.29 is a kind of ultra-pure water atomized iron powder. With apparent density 2.95-3.10g/cm3, good compressive performance, wide range of application, and it is widely used in the production of high strength and high density sintered structural part |
2019-09-11 |
|
Mo Alloy Powder
LAP100.29M01: Add Mo (0.50-0.70%)into the molten steel,which enables all alloy elements fully integrated into the molten steel.The powder has high compressibility and high hardenability.This type of power is mainly used for production of good heat treatme |
2019-07-16 |
|